Cllena 12V to 48V 20A 960W Boost Converter Module

The wiring instructions are as follows: Connect the OUTPUT+ to the LOAD+, and the OUTPUT- to the LOAD-. Also, connect the INPUT+ to the BAT+, and the INPUT- to the BAT-. Please note the following important points: * Never connect this device to a solar panel, PWM/MPPT charge controller, inverter, or wind turbine. * Never attempt to charge the battery using this device. Ensure adequate air convection for cooling. * Never reverse the polarity of the connections. * Use cables with sufficient size to avoid voltage drop.

The application of this device is to use a 12V DC battery as the input power source and power 48V DC appliances as the output load.

The specifications are as follows: Input Rated Voltage: 12V DC Input Voltage Range: 10V-16V DC Output Voltage: 48V DC Output Current: 20 Amp Output Rated Power: 960W Efficiency: 97% (half load); 95% (full load) Weight: 2200g

The key features of this device are: 1. 100% full power and stable current output, non-isolated module. 2. Industrial-grade DC 12V to DC 48V step-up converter, with efficiency up to 95%. 3. Die-cast aluminum shell, epoxy potting, and cooling by free air convection. Waterproof level IP68 and anti-shock protection. 4. Protections: Over-current, Over-voltage, Over-temperature, Over-load, and Short-circuit, with auto-recovery when the device returns to normal operating conditions. 5. Certifications: CE/RoHS, 1-year warranty, and a lifetime of up to 100,000 hours.

The package includes 1 x DC 12V-48V 20A Step-up Converter.

To choose the correct current for your loads, consider the following: * For resistive loads, if the maximum current of your load device is 10A, choose a current of at least 10A/0.8 = 12.5A, according to international standards. * For motor or compressor loads, if the maximum current of your load device is 10A, choose a current of at least 10A/0.5 = 20A, as the starting current for motors and compressors can be 2-3 times the nominal current.

The input voltage range is DC 10V-16V, the output voltage is DC 48V (non-adjustable), and the output current is 20A (rated working current), providing an output power of 960W.

The device has a high conversion efficiency, reaching up to 95%. Its dynamic response speed is 5 percent 200US. However, if the temperature exceeds 40°C, you should reduce the power or enhance the heat dissipation.

The device is protected against over-load, over-current, over-temperature, short-circuit, and over-voltage.

The aluminum shell and silicone-sealed design make the device waterproof, shock-resistant, humidity-proof, and dust-proof, ensuring long-lasting durability.

This device has a wide range of applications, including trucks, taxi radios, EMUs, car audio systems, LCD TVs, advertising screens, LED lights, monitoring systems, and other electronic systems.

product information: